Cable Reel Shipment Should Pay Attention to the Problem

November 21, 2022

The power cable is generally wound on the cable reel for transportation, storage and laying. A short cable of less than 30m can also be rolled into a circle with a bend radius not less than the minimum allowed by the cable, and transported after being tied up at least four times. Cable, mining cable in the past, the cable reel is mostly wooden structure, and now it is mostly steel structure, because the steel structure is strong, not easy to damage, and it is very good for the protection of the cable, and the cable reel can be reused, and the economy is better than the wooden cable reel. In the process of transporting and loading and unloading cable reels, the key problem is not to damage the cable and not to damage the insulation of the cable. Although this is a well-known problem, it still happens from time to time and should be given sufficient attention.

1. Cable reel shipment

The cable reel is generally installed by crane. When the cable reel is transported in the car, the pedicure sand should be issued steadily and firmly fixed. The edge of the cable reel should be stuffed to prevent the cable reel from shaking, colliding with each other or tipping over.

Cables must be checked before transportation. The cables should be in good condition and the cable ends should be tight. The inner and outer ends of the cable and the oil pipe between the oil-filled cable and the pressure box should be firmly fixed on the disc to avoid being shaken loose during the transportation process; The oil supply valve on the pressure box should be in the open state, the pressure indication is normal; The outside of the cable should be well protected to prevent external damage. If the problem is found, it should be dealt with before loading and losing. The cable reel is not allowed to be mounted horizontally. Lying flat will make the cable winding loose, also easy to damage the cable and cable reel.

cable reel shipment

2. Unload the cable reel

If there is no lifting equipment when unloading, it is strictly prohibited to push the cable reel directly from the transport vehicle. Because of the direct push down, not only the cable reel is damaged, but also the cable is prone to mechanical damage. The smaller cable reel can be made of wood to form a slope, and then the cable reel can be slowly rolled down the slope by a winch or rope.

Do not lift several cable reels at the same time when loading or unloading cable reels.

cable reel unload (2)

3. Rolling of cable reel

The cable reel must be controlled within a small distance when rolling on the ground. The direction of rolling must follow the direction shown on the side of the cable reel (following the direction of cable winding). If the reverse rolling will make the cable unwound loose, fall off

The cable reel uses safety commands. The use of the mobile cable reel is similar to the power socket in our daily contact. They are all mobile power supplies for the convenience of daily production and life. Then the safe use of mobile cable reel is similar to the use of power in our life.

Whether it is the precautions in the working environment or the protection measures when plugging and discharging, the two have something in common. Then what is the common sense of safe electricity use that we should know? First of all, the mobile cable reel in use cannot overload power.

In order to ensure that there is no overload operation in the circuit, in the mobile cable reel, in order to ensure safety, each product is installed with overheat overload and leakage protection device, overload will automatically trip.

Secondly, high-power electrical appliances are often equipped with three-core sockets, in order to achieve safe grounding in the electrification process; in the mobile cable reel, all panels are equipped with three-hole ground sockets.

Third, in daily life, the mobile cable reel in use, cannot use copper wire wire instead of fuse, cannot use enameled wire instead of electric heating wire and other substitutes.

Fourth, people go off power, power failure also need to disconnect the power switch, so as to avoid accidents when calling. When used in industrial situations, if there is a power failure, contact the electrician to check if there is no problem or repair before continuing to use.

Fifth, do not put the mobile cable reel in the wet, flammable environment, although the industrial cable reel with waterproof function, but for a long time in the wet environment, will also affect its normal work. Secondly, there are inflammable substances in the working environment, when the current overload or the occurrence of power supply ignition will cause fire risk.

http://www.spool-manufacturer.com

前

私たちを苦しめます

著者:

Mr. Garfield Lee

Eメール:

sales@onereel.cn

Phone/WhatsApp:

+8613777009159